Select Mineral Oil
Select Mineral Oil from Agilent Technologies
Total petroleum hydrocarbon analysis is a routine technique in many environmental laboratories, with many samples needing to be screened. A simple and reliable method is required that provides the shortest analysis time. Agilent J&W Select Mineral Oil meets this need, with a stabilized nonpolar bonded phase specifically for fast mineral oil analysis. The column is temperature stable up to 375/400 °C and provides speedy analyses according to DIN H53 and DIN-EN-ISO 9377-2 methods. Thanks to the temperature stability of Select Mineral Oil, C4-C40 hydrocarbons can be analyzed in less then ten minutes. The high temperature stability of the column permits faster bake-out. Note: For optimal injection performance use the special 4-m retention gap part number CP8015.
All pictures shown are for illustration purpose only. Actual product may vary.
- Buy
- Features
-
- Stabilized non-polar bonded phase engineered for fast mineral oil analysis
- Optimized selectivity for reliable Total Petroleum Hydrocarbon (TPH) results per DIN H53 N-ISO 9377-2 methods
- C4 to C40 hydrocarbons can be analyzed in less than ten minutes
- Low bleed
- Available in Fused Silica or UltiMetal
- Fast run time
- High temperature stability up to 375/400 °C
Similar Phases: Rtx-Mineral Oil
- Specifications
-
Select Mineral Oil Temperature Specifications
ID (mm) 0.32 mm Length (m) 15 m Film (µm) 0.10 µm Temperature Limits (°C) -60 - 390/400 °C Retention Gap Temperature Specifications
ID (mm) 0.53 mm Length (m) 4 m Temperature Limits (°C) -60 - 325/350 °C - Literature
-
-
Agilent GC Column Brochure
Full range of Agilent Technologies GC columns and applications
-